cast nylon 12

2 minute read

| February 6, 2014

Power-Core Withstands Pulsed High Voltages

The development of high-voltage pulsed power systems for both research and commercial applications has created a tricky...

Power-Core gears

2 minute read

| January 30, 2014

Does your segway make too much noise? Have you ever wondered where it is coming from? Segway drive gears in the segway gear...

washdown application

3 minute read

| January 16, 2014

Robotic arms for e-coat systems have traditionally been made from aluminum, whose strength-to-weight ratio made it seem...

washdown application

4 minute read

| October 3, 2012

Intech’s Power-Core® rollers have found uses in applications ranging from industrial machines to transportation. Most of...

cam followers

3 minute read

| October 1, 2012

When designing motion systems that require rollers or cam followers, many engineers still believe that only all-metal...

cam followers

5 minute read

| September 10, 2012

How to avoid design compromises when the equipment function calls for cam followers Engineering design is an art of...

cam follower

| February 2, 2012

Below is the first look at our newest product: A non-lubricated linear Slide.

cast nylon 12

| December 9, 2009

Continuing the theme of our last blog entry, moisture absorption is also a factor in determining the tensile strength of...

cast nylon 12

2 minute read

| November 25, 2009

Moisture absorption is a key factor to consider during nylon material selection. Design engineers need to take account of...