Intech Power-Core Thermoplastics Engineering Blog

Composite Worm Gears Extend Wear Life in Tough Applications

Posted by Simon Barrell on Jan 7, 2010 2:23:00 PM

Intech engineers are frequently asked for help to determine worm gear size, design parameters and to make wear-life projections using our proprietary gear calculations. As a result of these calculations, Intech Power-Core™ composite worm gears are chosen to replace industry-standard bronze gears in demanding operations to increase transmission efficiency with quieter, longer-wearing performance.

Intech Power-Core Worm Gears


Intech Power-Core Worm Gears


Power-Core material does not require special grade oil or frequent oil changes and the composite material does not generate abrasive particles which become suspended in the oil as a contaminant that contributes to wear. The tough, self-lubricating properties of the composite gear material enable Intech Power-Core worm drives to consistently outlast conventional bronze worm gears.

We completed a 1,000 hour test that compared gear performance between the Intech Power-Core gear and a case-hardened ground steel worm gear, and the results confirmed the capacity of Power-Core material to absorb shock load and vibrations. Test data showed an average noise reduction of 6 dB, with up to an 8% increase in gear transmission efficiency and no wear was detected on the 6.5 PD Power-Core worm gear.

In applications such as conveyors for glass washing or light load semi-conductor manufacturing machinery, the Intech Power-Core worm gears run with only light grease lubrication, or completely dry. Even in high torque applications that result in friction, the self-lubricating Power-Core worm gear can run for extended periods without lubrication.

The mating worm shaft can be made of conventional materials utilizing standard manufacturing methods. The low-maintenance Power-Core composite worm gears use readily available machine oil to lubricate the gear box, instead of more expensive specialized synthetic oil that is usually recommended for bronze worm gears.

Tags: Power-Core, wear life, composite material, gear box, shock load, vibration, self-lubricating gears, bronze gear, Gear Calculation, gear life calculation

Medical Latex Dipping Device for Easy Cleaning with Proprietary Gear Design

Posted by Simon Barrell on Oct 28, 2009 11:30:00 AM

Power-Core™ gears have been used to upgrade the design of a latex dipping gear cassette assembly in a unique arrangement that replaces standard gears in order to meet critical performance and cleaning challenges.

The original gear box design resembled a tightly fitting cassette made with standard off-the-shelf gears. Unfortunately, as the latex material was being processed, the gears reacted with the latex material and expanded in size until the ceased turning. Cleaning required a complete disassembly of the cassette, followed by awkward and time-consuming hand scrubbing of individual components to yield less-than-satisfactory results.

In addition to requiring an easier cleaning process, the medical device manufacturer wanted longer wear-life and improved performance from the gears. Frequent cleaning and premature gear failure caused by gear swelling resulted in wear stress that resulted in system downtime and replacement on average every few months.

As part of a failure analysis, Intech provided an engineering design review that included a custom gear life calculation. Our engineering team recommended a system design modification to address performance uptime, improve wear life, and to create a user-friendly non-hazardous cleaning process.

open sandwich design allows easy cleaningThe gear box modification design features custom Intech Power-Core™ gears with a larger pitch diameter, wider face width, and an integral stainless steel shaft that extends on each side of the gear and rotates directly within the load bearing cover plates. The open sandwich design, which can be seen in this image, allows for easy cleaning.

Compared to the previously used injection molded gears which vary in size due to internal stresses and moisture absorption, the precision machined Intech Power-Core™ gears provide consistent, smooth-running operation at reduced torque. Uniform Power-Core material will not distort or change size, so individual gears can be interchanged easily without matching pre-existing gears for a uniform fit, whereas injection molded gears had to be matched to other gears in order to function.

Intech Power-Core™ gears are machined from an inert, stress-free non-hygroscopic material with integral stainless steel shaft that offers outstanding performance where corrosion, abrasion, noise, lubrication, vibration, shock, and moisture create hostile operating environments.

Tags: Power-Core gears, wear life, gear box, vibration, gear life calculation, gear design, non-hygroscopic