Intech Power-Core Thermoplastics Engineering Blog

5 Advantages of Plastic Rack and Pinions in Motion Applications

Posted by Alexander Bartosch on May 21, 2014 4:00:00 PM

 Polymer Eliminates Contamination in Linear Motion Systems 

In an ideal world, linear motion systems would run only in squeaky clean operating environments. In the real world, linear motion systems usually have to run in plants with varying degrees of contamination, chemical exposures or moisture. These less-than-ideal conditions can shorten the lifespan of linear motion systems that rely solely on metal drive components—particularly rack-and-pinions.

KLEENLine conveyor with Intech Gear self lubricating rack and pinion

(Pictured Above: Intech Power-Core™ Gear and Stainless Steel Rack in a High Speed Retractable Bakery conveyor - Read More Here )

To meet the challenges posed by real-world operating conditions, we have designed and delivered many rack-and-pinion systems based on our Power-Core™ polymer.  Typically these consist of an Intech Power-Core™ gear with a stainless steel core and a stainless steel rack, though some applications have been best served by a Power-Core rack and a stainless steel pinion. 

Either way, we’ve found that use of polymers has five key advantages in rack-and-pinion applications:

  1. Eliminates lubrication. As a self-lubricating polymer, Power-Core™ does away with the need to apply lubricants over the life of the rack and pinion. The elimination of lubricant eliminates a key source of contamination in sensitive applications such as packaging, pharmaceutical, semiconductor or food processing. 
  2. Extends wear life. Power-Core and stainless-steel together offer an extended wear life and typically last for several years longer than all-metal designs. The user of Power-Core has also allowed us to create some design features that further extend wear life—such as pitch line control feature prevents pinions from bottoming out.
  3. Prevents corrosion. Traditional rack and pinion designs with metal gearing are subject to rust and corrosion, particularly in washdown applications. As a polymer, Power-Core does not corrode at all.
  4. Remains dimensionally stable.  Thanks to the physical properties of its base polymer, Power-Core does not suffer from dimensional and tensile property changes that affect conventional polymers when exposed to moisture, chemicals or elevated temperatures. Power-Core's base polymer has one of the lowest moisture absorption rates of any engineering plastic. Power-Core stands up to a wide range of industrial chemicals.  And Power-Core exhibits about 50% better high-temperature performance than comparable engineering polymers. 
  5. Improves motion control. Power-Core can produce rack-and-pinions that operate both smoothly and quietly as the rack moves back and forth, reducing noise by about 6 dBa compared to all meal components. The reason is that polymer has intrinsic vibration and shock load damping properties.  Power-Core components also weigh about 85% less than a comparable metal component. In motion applications, this weight reduction translates directly to reductions in moving mass and inertia.

Rack-and-pinions based on plastics components do have to overcome the perception that they won’t be as durable or carry the same loads as the all-metal designs familiar to motion control engineers. However, we’ve proven that perception false time and time again. 

Our experience with gear design and predictive analysis has allowed us to design polymer rack-and-pinion systems that can and do outlast all-metal designs in highly-loaded applications. To learn more, give us a call.

Contact an Engineer

Tags: rack and pinion system, self-lubricating gears, gear design, r gear life calculation, custom gear design

Still Lubricating your Rack and Pinion System?

Posted by Simon Barrell on May 13, 2011 1:52:00 PM

Lubricating a rack and pinion gear drive is often done manually. In industries, such as in food processing or packaging, where frequent washdowns are required, or where the gears are difficult to access, lubrication may be done only infrequently. Automated lubrication systems represent additional cost and require regular monitoring as they can clog up.

Intech Power-CoreTM gears do not require lubrication, reduce noise, and transmit motion with higher efficiency. The gears are precision machined from Intech’s Power-Core material with integral metal core for a secure shaft attachment. For wash down applications the core is available in stainless steel.

An important factor in designing today’s high speed machines is low inertia especially in systems where reversing motion is required. Intech Power-Core gears are up to 7x lighter compared to steel, absorb shock and vibration when movement in one direction is reversed,  allowing higher machine speeds without sacrificing performance or wear life.

Intech engineers review each application and using a proprietary gear calculation, will advise the customer about the expected life of the gear. In many instances engineers are able to suggest design modification significantly improving the gear’s wear life. Intech rack and pinion gears can be found in bakery conveyors, position devices on packaging machines, cutting mechanisms on plastic bottle blow machines or on long gantry motion systems, to name a few.

Power-Core gear for bakery conveyor system  Power-CoreTM gear for bakery conveyor system

Tags: Power-Core gears, lubricating gear, rack and pinion system, washdown application, shock and vibration, gear wear life, automated lubrication system