January 7, 2010

Composite Worm Gears Extend Wear Life in Tough Applications

Intech engineers are frequently asked for help to determine worm gear size, design parameters and to make wear-life projections using our proprietary gear calculations. As a result of these calculations, Intech Power-Core™ composite worm gears are chosen to replace industry-standard bronze gears in demanding operations to increase transmission efficiency with quieter, longer-wearing performance.

Intech Power-Core Worm Gears


Intech Power-Core Worm Gears


Power-Core material does not require special grade oil or frequent oil changes and the composite material does not generate abrasive particles which become suspended in the oil as a contaminant that contributes to wear. The tough, self-lubricating properties of the composite gear material enable Intech Power-Core worm drives to consistently outlast conventional bronze worm gears.

We completed a 1,000 hour test that compared gear performance between the Intech Power-Core gear and a case-hardened ground steel worm gear, and the results confirmed the capacity of Power-Core material to absorb shock load and vibrations. Test data showed an average noise reduction of 6 dB, with up to an 8% increase in gear transmission efficiency and no wear was detected on the 6.5 PD Power-Core worm gear.

In applications such as conveyors for glass washing or light load semi-conductor manufacturing machinery, the Intech Power-Core worm gears run with only light grease lubrication, or completely dry. Even in high torque applications that result in friction, the self-lubricating Power-Core worm gear can run for extended periods without lubrication.

The mating worm shaft can be made of conventional materials utilizing standard manufacturing methods. The low-maintenance Power-Core composite worm gears use readily available machine oil to lubricate the gear box, instead of more expensive specialized synthetic oil that is usually recommended for bronze worm gears.

U3M Blog Post Cards

2 minute read
| January 8, 2014

Part II: All Plastic Gears Are Not The Same

Engineers sometimes lump all plastic gears together, with injection molded nylon gears as the point of reference. When we... Read More
| May 13, 2011

Still Lubricating your Rack and Pinion System?

Lubricating a rack and pinion gear drive is often done manually. In industries, such as in food processing or packaging,... Read More

Subscribe to email updates